DCTxBB5 v2.2.0.2

1. BB5 RAPU Based Products USB Flashing / UI support added: RM-776 (C3-01.5)
2. DCT4 INFINEON Based Products USB Flashing / UI support added: RM-692, RM-693, RM-702, RM-713 (C2-02, C2-02.1, C2-03, X1-01)


LG_GSM v2.2.0.2

1. Infineon: A108, A190, A190a, A190b, A210, A210b, GB125R, GC900fGO, GT350f, KS360GO added.
2. EGV V3-32 and EGV V3-64 Direct Unlock and IMEI enable added. Note: Use [Unlock] before IMEI rebuild.
3. EGV V3-64 new Flash Chips Support.


SAMs v2.2.0.2

TRIDENT VISION
for non 8 Digits PCK Fixed.
SWIFT-AEROFONE
E1050-CHN, E1050V, E1086i, E1150-CHN, E1155L, E1180, E1190, E1220i
added (PUNL,PIM,FL)
E1182L added (DUNL, PUNL, PIM, FL)
E1225T, E1182 TFS Flashing bug Fixed.
C3322 Unlock, IMEI, Sections bug Fixed.
B7722, B7732 Slave Part Flashing/Read/E2P added.
QUALCOMM
T669 Added.
INFINEON
C3011, C3560, C3750, C3752 added (CUNL, PUNL, PIM, FL, UFL)
E2232 Flashing bug Fixed.
for non 8 Digits PCK Fixed.


PREVIOUS RELEASES:


DCTxBB5 v2.2.0.1

1. DCT4+ ASIC2 Unlock Bug Fixed (RH-92, RH-93, RH-94, RH-95, RM-189, RM-190, RM-225)
2. Wrong Locks Status Indicator Fixed (RH-86, RH-87)
3. Detail Description Message on Bad VPL File Exception.
4. BB5 RAPU Based Products USB Flashing / UI support added: RM-744, RM-745, RM-775 (C5-00.3, C5-00.2, X3-02.5)


LG_GSM v2.2.0.1

1. Infineon: A100, A100a, A175, A175a, A175b, A180a, A180b, GB102GO, GB105a, GB107a, GB125a, GB126a, GS101a, GS101GO, GS107a, GS107b, GS117, GS155, GS155a, GS155b, GS500f, GU200, GU200a, GU200b, KF510c, KF600c, KF600d, KM570, KM570f, KP105a, KP106a, KP106b, KP107a, KP107b, T325g, TE350GO added.
2. ADI: KP115a, KP130b, KP215a, KP260c, KP265d added.


UFS_SAMs v2.2.0.1

SWIFT
Some DUOS models Slave Boot bug Fixed.
SWIFT-AEROFONE
E1050, E1055T, E1080W, E1170i E2P Size Fixed.
Max Section Size Increased.
E1182 added (DUNL, PUNL, PIM, FL)
C3303i, C3322, C3500 added (CUNL, DUNL, IM, SECT, E2P)
Note:
C3322, C3500 TFS and CSC Flashing not Supported yet, use Original Flasher.
SWIFT-3G
C5010B added (CUNL, SECT, FL)
QUALCOMM
A885, A886, F406, S3370B, S3370L added.
INFINEON
E2652, E2652W USB Flahing bug Fixed.
E2152i added (CUNL, PUNL, PIM, FL, UFL)
XGOLD213 BIF file Write bug fixed.
XGOLD213 Patch bug fixed.
BROADCOM
B5310R, C6712, S3853, S5250W added (UFL)
COMMON
Used Abbrevations List can be seen at the Bottom of this page.


DCTxBB5 v2.2.0.0

1. BB5 products: RM-576, RM-577 (6700s, 6700s-1c) added.
2. Local RPL Service Fixed for ASIC 2,5,6,7,11 (UEM_PASW is Correct now) Note: Need Confirm [Readout and Use UEM IMEI] when do [Rd UEM].
3. [Check Ask/Rpl] Renamed to [Calc Ask/Rpl] as can Calculate RPL now.
4. [Calc Ask/Rpl] Function will Generate Real RPL from ASK file (ASIC 2,5,6,7,11) Note: When Reading UEM, do not Forget Set Right [UEM Changed] Status !
5. RSA Lock/Unlock for All DCT4+ products (not need Patch)
6. Life Timer added to [PM Edit]
7. DCT4 INFINEON Based Products USB Flashing / UI support added: RH-111, RH-125, RH-126, RM-607, RM-608, RM-643, RM-644, RM-647, RM-653, RM-669, RM-689, RM-704, RM-732, RM-733 (1202, 1616-2, 1616-2b, C1-01, C1-01.1, C1-02, C1-02.1, 1280, 1800, 1800b, C1-00, C2-00, X1-00, X1-00.1)
8. BB5 RAP3Gv40 Based Products USB Flashing / UI support added: RM-509, RM-510, RM-511, RM-540, RM-598, RM-604, RM-615, RM-638, RM-721, RM-722 (3710a-1, 3710a-1c, 3711a-1, X3-00, 7230-1c, 7230-1, 5330-1d, 6303ci, C2-01, C2-01.5)
9. BB5 RAPU Based Products USB Flashing / UI support added: RM-582, RM-596, RM-601, RM-609, RM-610, RM-627, RM-629, RM-632, RM-634, RM-639, RM-640, RM-645, RM-648, RM-658, RM-659, RM-662, RM-675, RM-682, RM-688, RM-691, RM-697, RM-699, RM-707, RM-718, RM-719, RM-720, RM-749 (Vertu CQ, N8-00, C6-01, E6-00, E6-00.1, X5-01, 5230-1d, E5-00, E5-00.2, X3-02, C3-01, C5-00.X5-01.2, E73,X7-00.1, C3-01m,C7-00, 6702s, C5-00.1, C7-00b, C5-03, E5-00m, X7-00, C6-01.3, C5-03.2, C5-04.1, C7-00s)
10.BB5 RAPIDO Based Products USB Flashing / UI support added: RM-484, RM-485, RM-486, RM-551, RM-552, RM-559, RM-588, RM-593, RM-594, RM-612, RM-624, RM-625, RM-684 (N86-1, N86-3, N86-5, X6-00.1, X6-00m, X6-00, 5230-1, 5230-1c, 5230-1b, C6-00, C6-00.1, 5288, 5250)
11.BB5 JUNO (BCM21351) Based Products USB Flashing / UI support added: RM-497, RM-586, RM-614, RM-618, RM-709, RM717 (7020a-2, 2710c-2, C3-00, X2-00, X2-01, X2-01.1)
12.Original SX4 Card Support Added (Use Any PCSC Compatible Card Reader)


LG_GSM v2.2.0.0

1. Infineon: A110, A130, A133, A133GO, A170, A180, C100, C105, C300, C300GO, C305, C310, GB220, GB220nGO, GB230, GB280, GD350, GD510, GD510N, GM360, GM360i, GM600, GS170, GS290, GS290GO, GS290N, GS390GO, GS500, GS500g, GS500gx, GS500v, GT350, GT350GO, GT350i, GT360, GT365, GU220, GU230, KC550, KC550d, KF510, KF510d, KF600, KF600d, KM380, KM380c, KM380d, KM385d, KM386c, KP500, KP500N, KP501, KP502, KP502GO, KP505, KP550, KP570q, KS360, KS365, T300, T310, T310i, T310N, T315, T315i, T320, T320e, T320g, T325 added.
Notes:
1. To See Unlock Codes and Instructions, Press [BOOT]
2. To Flash Dead Phones, Tick [Emerg. Boot]
3. FLS and BIN files supported for Flashing.
2. USB Support for Infineon SGOLD3, SGOLDRADIO, XGOLD213.
Note: To use USB Select USB in [Baud] ComboBox.
3. ADI: G210, G220, G232, G233, G259, G262, G263, G610, G622, G632, G635, G639, G660, G672, G677, C682, G688, G810, G822, G828, G912, GM200, GM205, GM205GO, GM210, KF245, KG296, LG8930, MG235, MG295, MG296 added.
4. TI: C1300i, C2000, G850, L1400i, MG191a, MG191b, MG200c, MG200d added.
5. MTK: A120, A155, A160, A165, GB160a, GB160b, GB161, GB190a, GB270, GS190, GS200, GS205 added.
6. BT Address Write Added for ADI, Infineon and MTK platforms.


SAMs v2.2.0.0

TRIDENT
A127, i626, T719, X475 added (DUNL, IM, FL)
OM(SYSOL)
T209, T319 added (DUNL, IM, FL, SECT)
SWIFT
A436, A437, A516, A517, T229, T249, T339, T349-LTA-USA, T369, T409, T619, T739 added (DUNL, IM, SECT, FL)
Added Multi Drive support for TFS Read.
Fixed SLAVE Boot Bug on some models (D980, D980F, D988)
TFS Extractor and TFS Builder added, Allows to Edit TFS files.
SWIFT-AEROFONE
Added [Patch MSL] Function to Patch without MCU Part Flashing.
C3300i, T109, T119 added (DUNL, IM, FL)
E1050, E1055G, E1055T, E1080F-IND-MEA-SEA, E1080W, E1081T-EU-IND-MEA-SEA, E1083C, E1085F, E1085F-MEA, E1087T, E1105F, E1150i, E1160i, E1170i, E1170T, E1172, E1175T-EU-IND, E1178, E1225F, E1225T, E1225T-IND, E2121L added (PUNL, PIM, FL)
Notes:
1.Mixing of EU IND MEA SEA Files causes Blinking or Dead Sets.
2.E1081T EU E2P Image is not Compatible with IND, MEA or SEA.
3.For Cross Flashing Select Model Name Extension by File type.
4.Before Unlock, Info to see Codes or Rebuild IMEI use [Patch MSL] Button or Flash with [Patch MSL] Option Enabled.
C3222, C3222W added (DUNL,CUNL)
Note: C3222 Flashing not Supported yet, use Original Flasher.
TFS Extractor and TFS Builder added, Allows to Edit TFS files.
SWIFT-3G
C5010E,E3210 added (CUNL,SECT,FL)
QUALCOMM
A597, A847, A927, B2710D, C5180, S5520, S5580, S6700T, S6888, T359, T479, T746, T749 added.
More Versions Support of Hidden Sysinfo models CUNL and UNFR:
A597, A706, A707, A717, A727, A847, A887, A897, A927, B2710, B2710D, S3370, S5530, T359, T469, T479, T559, T659, T746, T749
QUALCOMM+LSI
S8500B, S8530 added (FL)
BROADCOM
S5230N added (FL,CUNL,UNFR,BRP)
S3850, S5260, S5263, S5330L, S5560i, S5750E, S5753E, S7230B, S7230E, S7230W, S7233E added (FL) S5250, S5253, S5330, S5330L, S5333 Boot Repair (BRP)
[QCDI Info] Renamed to [BCMBL Info] for BroadCom Models.
INFINEON
B3310i, C3200, C3200G, C3200L, C3530, C3530L, E2230, E2230M, E2232, E2330, E2330B, E2330C, E2530, E2652, E2652W, S3310i, S3350, S3353, S3550, S3550C, S3550L added (CUNL, PUNL, PIM, FL, UFL)
Note: for USB Flashing select 'USB0' in [BaudRate] box.
E1151, Now Possible to Flash Read BIN Dump (Size: 007F0000)